移动叔叔

标题: ZTE 中兴 V5S 双4G兼容版 N918St 砖机刷活问题高通msm8916 [打印本页]

作者: 德国之声 时间: 2021-10-26 13:02
标题: ZTE 中兴 V5S 双4G兼容版 N918St 砖机刷活问题高通msm8916
ZTE 中兴 V5S 双4G兼容版 N918St 砖机刷活问题高通msm8916

认真拜读本论坛高手教程
http://bbs.ydss.cn/forum.php?mod ... 46&highlight=N918st
[教程] 首发原创：V5S n918st正宗高通线刷救砖工具及教程，带改串码

安装高通 QPST.2.7.460
QFIL 刷新工具 Qualcomm HS-USB QDLoader 900x (COMx)

高通线刷救砖包by yczouyun

QFIL 刷新工具  输出实时刷新报告结果
Log is 'C:\Users\Administrator\AppData\Roaming\Qualcomm\QFIL\COMPORT_12\port_trace.txt'

显示如下

14:41:03: DEBUG: XML FILE (131 bytes): CharsInBuffer=321-131=190
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?><data><log value="Read back verify failed at sector 1167347493,num sectors 399360" /></data>
-------------------------------------------------------------------------------------------

14:41:03: INFO: TARGET SAID: 'Read back verify failed at sector 1167347493,num sectors 399360'
14:41:03: DEBUG: XML FILE (98 bytes): CharsInBuffer=190-98=92
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?><data><log value="Finished sector address 399360" /></data>
-------------------------------------------------------------------------------------------

14:41:03: INFO: TARGET SAID: 'Finished sector address 399360'
14:41:03: DEBUG: XML FILE (92 bytes): CharsInBuffer=92-92=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?><data><response value="NAK" rawmode="false" /></data>
-------------------------------------------------------------------------------------------

14:41:03: DEBUG: Response was 'NAK'

      _____
      |  ___|
      | |__ _ __ _ __ ___  _ __
      |  __| '__| '__/ _ \| '__|
      | |__| |  | | | (_) | |
      \____/_|  |_|  \___/|_|

14:41:03: {ERROR: handleProgram:8816 Please see log

QFIL 刷新工具  port_trace.txt 最后报告错误结果如上  刷新失败 ERROR

请各位大神提示错误问题何在，小弟好改正修复，谢谢。。。。

.

16:14:34: INFO: =======================================================
16:14:34: INFO: ==================== {SUCCESS} ========================
16:14:34: INFO: =======================================================
16:14:34: INFO: {percent files transferred  47.00%}
16:14:34: INFO: In handleProgram('rpm.mbn')
16:14:34: INFO: Looking for file 'rpm.mbn'
16:14:34: INFO: =======================================================
16:14:34: INFO: {<program> FILE: 'C:\000000\rpm.mbn'}
16:14:34: INFO: {<program> (145.24 KB) 291 sectors needed at location 398336 on LUN 0}
16:14:34: INFO: =======================================================
16:14:34: INFO: TARGET SAID: 'start 398336, num 291'
16:14:34: INFO: FILE ACCESS SLOW!!  145.50 KB in  0.015 seconds ( 9.47 MBps) --- Overall to target  0.031 seconds (4.58 MBps)
16:14:34: INFO: {percent files transferred  47.14%}
16:14:34: INFO: TARGET SAID: 'Finished sector address 398627'
16:14:34: INFO:
16:14:34: INFO: =======================================================
16:14:34: INFO: ==================== {SUCCESS} ========================
16:14:34: INFO: =======================================================
16:14:34: INFO: {percent files transferred  47.14%}
16:14:34: INFO: In handleProgram('boot.img')
16:14:34: INFO: Looking for file 'boot.img'
16:14:34: INFO: =======================================================
16:14:34: INFO: {<program> FILE: 'C:\000000\boot.img'}
16:14:34: INFO: {<program> (6.99 MB) 14320 sectors needed at location 399360 on LUN 0}
16:14:34: INFO: =======================================================
16:14:34: INFO: TARGET SAID: 'start 399360, num 14320'
16:14:35: INFO: Overall to target  0.406 seconds (17.22 MBps)
16:14:35: INFO: {percent files transferred  54.11%}
16:14:35: INFO: TARGET SAID: 'Read back verify failed at sector 1167347493,num sectors 399360'
16:14:35: INFO: TARGET SAID: 'Finished sector address 399360'
      _____
      |  ___|
      | |__ _ __ _ __ ___  _ __
      |  __| '__| '__/ _ \| '__|
      | |__| |  | | | (_) | |
      \____/_|  |_|  \___/|_|
16:14:35: {ERROR: Please see log}
Writing log to 'C:\Users\Administrator\AppData\Roaming\Qualcomm\QFIL\COMPORT_16\port_trace.txt', might take a minute
Log is 'C:\Users\Administrator\AppData\Roaming\Qualcomm\QFIL\COMPORT_16\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Fail

rocess fail
Finish Download

.

作者: anwaryzd 时间: 2021-11-1 18:07
感谢分享

欢迎光临移动叔叔 (http://bbs.ydss.cn/)