|
本帖最后由 gzhmoren 于 2014-2-17 09:27 编辑
各位大大,我的机器是康佳w105,mt6575,用论坛提取工具备份了系统,也用一键制作rec做了rec,但线刷不了,用移动叔叔工具箱也卡刷不了,现在是3e的rec,求解!qq16833955谢谢
1、 已经提取了原厂资料,
2、安装“MTK智能机USB驱动+刷机必备驱动大全by移动叔叔”自动安装驱动
3、SP_Flash_Tool_v3.1244by移动叔叔,打开后,拔电池,插数据线,点DOWNLOAD,
提示,common hint:for sp flash tool issues:
PLease supply your tool version,gui screen shot,and tool logs when you encounter trouble with the latest tool
How to obtain the tool logs?
1.run the tool;
2.press ctrl+alt+t(tool title hint:tuntime trace mode);
3.[menu]help-[submenu]open logs folder.
brom error:s_com_port_open_fail(1013)
[com]failed to open com3
[hint]:possible reason:1.if you use uart1 to download da,please make sure that you have selected the correct uart1 com potr first!2.usb driver is abnormal,please restore them,and then try again.
4.找到同时MT6575的欧乐风V12中文recovery,用’一键移植recovery‘,把原厂REC和中文REC移植了一个新的REC。
5,由于第3个原因线刷不行,我把做的新的REC拷贝到SD卡上,用移动叔叔工具箱里的RECOVERY更新,结果还是原来的3E版本。
郁闷中。。。。。。。。。。。
高手看到后指导一下啊。
我很想直接刷那个中文的RECOVERY,害怕变砖,现在停在这里搞不下去了。
求指导
求远程
QQ:16833955,谢谢了
|
|