基带丢失，用基带写入工具失败，代码放上，求大大分析一下，万分感谢！

chesterche

前几天用flash tool线刷系统时，手贱，选了格式化并下载，然后基带就没了，打不了电话，但能开机，能用WIFI，用了各种方法，都搞不定，看了冷风大大置顶的永久写入IMEI工具，于是试了下，但是一直不行，放上代码，求各位大大帮忙分析一下，万分感谢！@~！

>>Step:Begin Scan Smart Phone data...
>>Step: Start to Connect with target...
Init Modem handle by META_Init_Ex_2_r successfully, TargetStype= 1.
COM port searching and preloader handshake...
COM port searching and preloader handshake ok
COM port searching and Kernel handshake...
   OK: Enter Smart phone modem meta, Connect to target successfully.

>>Step: Star init Modem nvram database...
        OK: Init Modem Nvram Database successfully.
>>Step: Start to Init AP Nvram Database...
        OK: Init AP Nvram Database successfully.

>>---------------------------------------------------<<
>>Step: Enter func_imei_meta_hdlr_smart_phone_modem();
        Write IMEI to smartphone modem nvram
   OK: SVN=0xff and PAD=0xff

>>Step: Start to write. CheckSum=0, IMEILock=0.
   Error: Write IMEI fail. Meta Result = 43
ERROR!! Go to ST_END statues is: ST_IMEI

>>Step: Modem Meta Disconnect with target...

>>OK: Exit Meta successfully


PS：我用的是冷风大大置顶的写IMEI工具

13375931352

六忙兔 发表于 2014-2-24 18:49
我也丢过，冷风的线刷和写码都能恢复，就是线刷后是冷风的串号，我又用写码换了自己的串号

有教程吗