安卓神器viper4安卓音效软件成功集成，与魔音音效配合使用功能秒杀任何音乐手机！

191173630

饭没了秀全网首发
由于我是手机党无法上传附件请大家自己搜索下载安装，关于 audio_effects.conf文件的代码修改都搞了我个把星期，我把代码发出来大家自己编剧。该文件在etc和vendor里都要替换。魔音音效网上有下载的。代码如下：
# List of effect libraries to load. Each library element must contain a "path" element
# giving the full path of the library .so file.
#    libraries {
#        <lib name> {
#          path <lib path>
#        }
#    }
libraries {
  v4a_fx {
    path /system/lib/soundfx/libv4a_fx_ics.so
  }
  bundle {
    path /system/lib/soundfx/libbundlewrapper.so
  }
  reverb {
    path /system/lib/soundfx/libreverbwrapper.so
  }
  visualizer {
    path /system/lib/soundfx/libvisualizer.so
  }
  pre_processing {
    path /system/lib/soundfx/libaudiopreprocessing.so
  }
}

# list of effects to load. Each effect element must contain a "library" and a "uuid" element.
# The value of the "library" element must correspond to the name of one library element in the
# "libraries" element.
# The name of the effect element is indicative, only the value of the "uuid" element
# designates the effect.
# The uuid is the implementation specific UUID as specified by the effect vendor. This is not the
# generic effect type UUID.
#    effects {
#        <fx name> {
#            library <lib name>
#            uuid <effect uuid>
#        }
#        ...
#    }

effects {
  v4a_standard_fx {
    library v4a_fx

    uuid 41d3c987-e6cf-11e3-a88a-11aba5d5c51b
  }
  bassboost {
    library v4a_fx
    uuid 8631f300-72e2-11df-b57e-0002a5d5c51b
  }
  virtualizer {
    library v4a_fx
    uuid bb2ba0c0-b431-11df-a1c4-0002a5d5c51b
  }
  equalizer {
    library v4a_fx
    uuid ce772f20-847d-11df-bb17-0002a5d5c51b
  }
  avl {
    library v4a_fx
    uuid 87885321-b43c-11df-9520-0002a5d5c51c
  }
  loudnessmaximizer {
    library v4a_fx
    uuid 581f7be1-b43c-11df-ac25-0002a5d5c51c
  }
  trebleboost {
    library v4a_fx
    uuid acc17041-b43c-11df-93e8-0002a5d5c51c
  }
  visualizer {
    library visualizer
    uuid d069d9e0-8329-11df-9168-0002a5d5c51b
  }
  reverb_env_aux {
    library reverb
    uuid 4a387fc0-8ab3-11df-8bad- 0002a5d5c51b
  }
  reverb_env_ins {
    library reverb
    uuid c7a511a0-a3bb-11df-860e-0002a5d5c51b
  }
  reverb_pre_aux {
    library reverb
    uuid f29a1400-a3bb-11df-8ddc-0002a5d5c51b
  }
  reverb_pre_ins {
    library reverb
    uuid 172cdf00-a3bc-11df-a72f-0002a5d5c51b
  }
  agc {
    library pre_processing
    uuid aa8130e0-66fc-11e0-bad0-0002a5d5c51b
  }
  aec {
    library pre_processing
    uuid bb392ec0-8d4d-11e0-a896-0002a5d5c51b
  }
  ns {
    library pre_processing
    uuid c06c8400-8e06-11e0-9cb6-0002a5d5c51b
  }
}
# Audio preprocessor configurations.
# The pre processor configuration consists in a list of elements each describing
# pre processor settings for a given input source. Valid input source names are:
# "mic", "camcorder", "voice_recognition", "voice_communication"
# Each input source element contains a list of effects elements. The name of the effect
# element must be the name of one of the effects in the "effects" list of the file.
# Each effect element may optionally contain a list of parameters and their
# default value to apply when the pre processor effect is created.
# A parameter is defined by a "param" element and a "value" element. Each of these elements
# consists in one or more elements specifying a type followed by a value.
# The types defined are: "int", "short", "float", "bool" and "string"
# When both "param" and "value" are a single int, a simple form is allowed where just
# the param and value pair is present in the parameter description
#    pre_processing {
#        <input source name> {
#            <fx name> {
#                <param 1 name> {
#                    param {
#                        int|short|float|bool|string <value>
#                        [ int|short|float|bool|string <value> ]
#                        ...
#                    }
#                    value {
#                        int|short|float|bool|string <value>
#                        [ int|short|float|bool|string <value> ]
#                        ...
#                    }
#                }
#                <param 2 name > {<param> <value>}
#                ...
#            }
#            ...
#        }
#        ...
#    }

#
# TODO: add default audio pre processor configurations after debug and tuning phase
#